W-TCS Cold Plastic Spray Road Marking Machine is the common equipment for two component paint line striping constructions. It will suck and spray A, B component paint at the same time, A, B component paint will be mixed 1:1 outside the spray gun, and then be sprayed on road surface.

Cold paint road marking machine is a special equipment for normal temperature marking. It uses a gasoline engine to drive a single plunger pump, so that the coating can be sprayed under high pressure in the machine.

Tel: 0086-25-57070536 Mobile & WhatsApp: 008618805180339 Email: info@roadskymarking.com Address: NO.76 Panxin Road, Nanjing, China Zip Code: 210000

646.3.1.3 Cold Weather Marking (1) Do not place permanent paint or permanent tape marking if the ambient or pavement temperature is below 50 F. Choose an epoxy marking compatible with field conditions when placed. Do not place permanent epoxy marking if the ambient or pavement temperature is below 35 F unless the engineer allows in writing.

Road markings. Lagan Road Markings has completed works on motorways, local authority roads, NRA and on behalf of contractors. We have an impressive portfolio of clients and projects and operate with state-of-the-art equipment equipped with fully automated extrusion and spray facilities. Vehicle crews are fully trained and experienced.

A bead drop rate of approximately 7 lbs./gal. of paint for a 4-inch line and 30-35 mil thickness is a suitable range which can be fine tuned for optimum performance. The dry-to-no-pickup time for a 30-35 mil thickness application is typically 5 minutes or less depending on conditions. Liquid Thermoplastic can be applied with standard airless

The cold paint road marking is very common with a long history. Different from thermoplastic road marking, it is completed only by one unit road marking machine. In accordance with marking modes, the cold paint road marking machinery is divided into high-pressure airless type and low-pressure air spray type.

China Lj-Hxj Road Marking Cold Plastic Equipment Highway Roadline Paint Machine, Find details about China Road Marking Cold Plastic, Road Marking Equipment from Lj-Hxj Road Marking Cold Plastic Equipment Highway Roadline Paint Machine - Shandong China Coal Industrial & Mining Supplies Group Co.,Shenzhen NOKIN Traffic

Introduction of Road line marking machine BO-600HS is Cold Paint Two Components Road Marking Machine. It is a special road marking equipment for various reflective lines, such as road centerlines, lane dividers and marking lines at the place like airport,to paint straight lines, dotted lines, curve line, directional arrows.

ISO 9001:2015, ISO 14001:2015, CE certified.Thermoplastic Road Marking paint, Road Marking Glass Beads, Bituminous Marker Adhesive, RRPM-Road Markers, Thermoplastic Road marking Machine, Crack sealants, Crack Seal Tape, Crack Sealing Machines, AASHTO M247 Glass Beads, AASHTO M249 Thermoplastic paint, BS6088 Glass Beads, BS 3262 Thermoplastic

Specification: Model RS-5A RS-5B Dimension 1750*1050*1340 mm 1150*1000*1050 mm Weight 225 kg 155 kg Engine 9 HP gasoline engine 5.5 HP gasoline engine Pump and Control Method auto-shuttle plunger pump auto-shuttle plunger pump Working Pressure 10-18 Mpa 10-18 Mpa Marking Width 50-500 mm 50-500 mm Marking Thickness 0.2-0.6 mm 0.2-0.6 mm Marking Speed 13km/h 13km/h Marking Method high pressure airless spraying high pressure airless spraying Spraying Flow Rate 18 L/min 6 L/min Working On-Site

May 20, 2021 · Given that cold plastics are durable road marking materials, their exclusion would bring overall losses to road safety and the environment. In addition, to further limit undesired compounds, GPP excludes any road marking material that would require for the finished product several hazard labels per CLP Regulation ( European Parliament, 2008 ).

4).It has the features of flexible operation, small size, light weight, marking clear and full lines, spraying high adhesive force of paint and a wide range of applications in marking and spraying. 5).Airless spraying road marking machines can be equipped with Glass Beads Dispenser so as to enhance the reflection and warning effect of cold lines

The range of applications extends from the complete removal of asphalt and concrete to the layer-by-layer removal and levelling of asphalt and concrete surfaces. With WIRTGEN cold milling machines, it is possible to machine working widths from 1 ft 2 in up to 14 ft 5 in and working depths up to 1 ft 2 in in a single pass.

Go Green thermoplastic reflective marking paint is a kind of paint applied on the road to make the road marking. Its mainly consist of petroleum resin, EVA, PE wax, pigment fillers materials, its powder state in normal temperature, need to heat in hot-melt kettle to 180-200℃, keep heat preservation while stirring for 3-5 minutes, then apply on pavement to form a solid coating.