TT-CCK20-IP Driving Type Air Cold (Two-Component) Road Marking Machine Description Applicable to cold spray paint, high-viscosity and high-content paints

Cold Road Marking Paint is divided into Water-based Road Marking Paint amd Cold Solvent Road Marking Paint. Water-based road marking paint is suitable for bituminous and concrete roads. And it can be successfully applied to airless or air auxiliary spraying road making equipment.

Machine designing engineers often prefer three-component systems, but all PlastiRoute products come in two-component solutions as well. The PlastiRoute products have all the well-known properties of cold plastics - and additionally, it is characterised by high durability, low abrasion and low dirt pickup.

This machine is designed for road marking using two-component cold plastic (98:2) or fast drying paint onto cement-concrete and asphalt-concrete road. It can be used in a moderate climate with the ambient temperature of 5-30 ℃ and relative air humidity of no more than 85%.

W-TCS1 Two-component cold plastic road marking machine is a special machine for spray MMA paint, it can 1:1 intermix the 2K cold plastic paint completely, and then spray through 1 gun. The machine comes with spray type glass beads dispenser, which can make the MMA paint with high retro-reflection.

Engine Honda 5.5HP gasoline engine Marking method Cold plastic profiled dots lane 98:2 MMA Drive method 48V Battery,3hours charged/time can work about 10hours Control system Computer controller Mix system 98:2, Fluid with hardener pump Air Compressor

Thermoplastic Road Marking Machines Cold Paint Road Marking Machines 2-Components Road Marking Machines Airport Marking Glass Beads + TT-B-1325 D Type 3 Airport Marking Glass Beads HR (Direct Melt) Glass Beads + AS-NZS BHR Glass Beads

Two component road marking machine is an advanced marking method. Two components marking paint consists of cold plastic paint and curing agent. The two liquids are contained in separate tanks until they are sprayed and confluence in the air during marking operation. After cold plastic paint and curing agent are mixed in the air, they immediately

Spray Two Component Cold Plastic Paint Machine 2-Component Cold Plastic Profiled Dots Road Marking Machine Road Marking Additional Machine Line Driver Road Marking Thickness Gauge Road Marking Retroreflectometer RL/Qd Cases Solution

28/4/2019 · Shanxi Zhongtu Traffic Technology Co.,Ltd from China and sell various road marking paints including thermoplastic road marking paint & solvent road marking paint & MMA two-component cold plastic

Cold paint road marking machine is generally completed construction by a normal temperature marking machine. According to the different marking methods, the cold plastic road marking machine can be divided into two types: high-pressure airless type and low-pressure air-assisted type.

AC-HAL-II Hand-push Cold Paint Airless Road Marking Machine. AC-HAL-II hand-push cold paint/two-component road marking machine mainly used for small-scale road line marking work such as zebra marking, lines in parking lots and athletic fields, special characters and arrow indications.

15/1/2019 · Cold Plastic Two Component Screed Road Marking Machine Cold Plastic is more and more popular than cold paint and thermoplastic paint. Two-component Screed Road Marking Machine 50:50 Weather

Cold solvent paint (type I) Cold solvent paint & water-borne paint (type II, optional two-component paint) Marking width 50-450mm (adjustable) Difference TT-SCP90-I/IIP Double manual spray guns 1585*950*1040mm TT-SCP180-I/IIP Three manual spray

Road Marking Machine "Kontur 600 HP Spray" This machine is designed for thin-layer horizontal road marking using cold two-component spray plastic (in ratio 50/50) as well as traffic paint. Two independent lines supplying plastic A and B components ensures accurate 50/50 dosing, irrespective of different component viscosities.