Apr 02, 2015 · •Paint • The model for paint is as shown: R L = 55.2 + (0.77*R L Initial) – (4.17*Time) •Equations came from NCSU report “Pavement Marking Performance Analysis” by Dr. Joseph Hummer, et. al. •In this study data collected from NC roads was used to create degradation models for extruded thermoplastic and paint. 6

The analysis considers marking applied with fast-drying paint or thermoplastic, the most frequently used marking materials in the United States. A literature review and telephone survey suggested striping with fast-drying paint costs $0.035/linear-ft in rural areas and $0.07/linear-ft in urban areas. Thermoplastic lines cost more

Marking Paints, Striping Machines and Marking Equipment. Great pricing on high quality traffic paints, field paints and line striping machines. We carry a large assortment of the best brands including water-based, thermoplastic and inverted spray paints for direct use or for use in striping machines.

Videos of the SH 15.0 Applications. The Stripe Hog SH 15.0 is a water blasting and recovery system designed for either asphalt or concrete airfields and roadways for paint and thermoplastic removal, surface preparation, road retexturing, hydraulic spill cleanup, and removal of rubber deposits from airport runways. Airfield Marking Removal.

The complete removal of all forms of durable traffic markings from all surfaces has never been as quick, clean and cost-efficient. And perhaps best of all, very little to no confusing mark left behind, NO re-surfacing, and NO secondary clean-up or drying necessary. Thermoplastic, waterborne paints, epoxy paints, rubberized paints, even

Pavement marking technology is a continually evolving subject. There are numerous types of materials used in the field today, including (but not limited to) paint, epoxy, tape, and thermoplastic. Each material has its own set of unique characteristics related to durability, retroreflectivity, installation cost, and life-cycle cost.

Parking Lot Striping Prices. Striping or repainting a parking lot with 30 to 50 spaces will typically cost $425 but could cost as low as $300. For parking lots with more than 50 spaces or for brand new paint jobs, expect to pay $700 or more. Some companies up their rates by 20 to 50 percent if there aren’t existing parking lines.

retroreflectivity levels are achieved when an application rate of 25 pounds of glass beads per gallon of epoxy-based paint is utilized. Pavement Marking Task Force The desire to improve pavement marking operations and obtain better life expectancies for traffic paint led to the establishment of a Pavement Marking Task Force in 2002.

Pavement Marking Materials Thermoplastic Melted plastic Typically used only on HMA More expensive Requires more specialized equipment More durable under higher traffic Typical thickness = 90-125 mils Glass beads mixed in, as well as sprayed on top while still molten

Use our Yield Calculator for estimates for pavement marking yields. Calculator for thermoplastic input and waterborne paint input. Get estimate now!

From $9,693.00. NOKIN ThermoMark 300 - Thermoplastic Applicator Machine. From $10,795.00. NOKIN FastMelt 650 - 40 Gal Thermoplastic Melting Kettle. $14,359.00. Yellow Swarcotherm Thermoplastic Extrude Alkyd (Muni Spec) Granular Bags. From $784.00. 4 in Die Replacement for NOKIN ThermoMark Thermoplastic Applicator. $462.00.

With all the cost and time involved with a parking lot striping project, you don’t want to skimp on the quality of the paint. Quality parking lot striping provides optimum traffic flow and will enhance your property’s curb appeal. Several factors have a direct bearing on the cost of parking lot striping.

BM 3000 SP T. The BM 3000 series provides you with a variety of high capacity line marking machines designed for large scale jobs such as marking highways, motorways or airport runways. The material tank capacity can be up to 445 liters. The possibility for the large material capacity naturally gives fewer stops during the day for refilling.

The ASE Thermomark Handliner 300 thermoplastic striping machine is the larger version of our 250 Handliner thermoplastic machine and utilizes a 300-gallon hopper with insulated walls that keeps the material at a workable temperature during the application process.

of the thermoplastic material, the primer material shall be sprayed on the surface at the specified rates recommended by the manufacturer of the primer/sealer material. The spray equipment for the primer application may be mounted directly on a mobile type thermoplastic applicator or may be a separate, portable push- or mobile-type spray machine.