Pavement hot melt road marking machine / thermoplastic line striping machine Product Application Hand-push thermoplastic road markng machine adopt single-handle marking shoe. This machine has the advantage of high-quality construction, fast , flexible operation, convenient maintenance and so on.

T6625. Paint Stripe Traffic Machine. Designed for Striping Traffic Paints, this easy-to-use machine applies crisp, even 2” to 4” lines to concrete or asphalt. 18 lbs. $189.00. More Details. T1. Lightweight Aluminum Squeegee. The Lightweight Aluminum Squeegee includes a 1 3/8” diameter, 82” handle. Ideal for Tennis Court Coatings (with

The ASE Thermomark Handliner 300 thermoplastic striping machine is the larger version of our 250 Handliner thermoplastic machine and utilizes a 300-gallon hopper with insulated walls that keeps the material at a workable temperature during the application process.

We also offer our Thermoplastic Line Striping Machine in a larger 300-gallon model. Asphalt Sealcoating Direct has all of the needed thermoplastic paint and supplies you need for your line striping business. Note: Dies are not included. Check the "Replacement Parts" section below for a list of Dies that you might need.

May 11, 2020 · In cold ereas, thermoplastic paint road marking lines are easy to be removed by snow remover. The thickness of the cold spray marking line is only 0.2-0.4mm, the operation is simple, the cost is lower, as long as the temperature can be above 5 degrees, you can spray cold paint lines. So These city markings often use cold paint markings.

Features: • Dependable Subaru 169cc (6 HP), OHC gas engine with low oil alert. • Fast, easy, tool-free convertibility to 2 hp Extended-Life DC electrical motor. • Versatile Smart Arm™ can be positioned to spray on left, right, front or rear of striper. • Precise pressure control from 400 psi to 3300 psi. • Max.

NOKIN ThermoLazer thermoplastic line striping solutions withstand the harshest conditions to provide years of productive, profitable use. Whether you have an existing premelt kettle system or require premelting capability, each ThermoLazer delivers high productivity without the large investment.

The equipment needed to put down this type of thermoplastic is expensive. A thermoplastic handliner and premelt tank will run in excess of $20,000 and a truck based striper will run well over $100,000. Expensive stencils are also needed for lettering. The cost of this equipment has historically kept thermoplastic out of reach for the average

High Quality Thermoplastic convex road marking machine with operator seat/ road marking paint machineSLM 008615238618639 High Quality Hand-push Thermoplastic Road Marking Machine 008615238618639 1.Good quality and long life .2.Compet

Thermoplastic Machine Thermoplastic Road Marking Machine Self-propelled Thermoplastic Road Marking Paint Brush Making Machine. $3,500.00-$3,600.00/ Set. 1 Set (Min. Order) Shandong Lumei Traffic Facility Co.,Shenzhen NOKIN Traffic CN 3 YRS. 5.0 ( 15) Contact Supplier. Compare. Ad.

The machine has the following features as high flow capacity, wide application scope and easy operation. It is suitable for both the spray of ordinary paint and that of higher viscosity paint, such as oil paint, alkyd resin lacquer, nitro lacquer, epoxy resin lacquer and other kinds of paint.

(2) 200 gallon tanks. Only 9,700 miles and 1,500 hours. Like new! $74,750 | 770-331-2550 | Used Striping Equipment

Easy Operation Airless Spray Road Striping Marking Machine . Our NOKIN PowrLiner 850 Paint Striping Machine was created to be small and affordable, but powerful enough for most small to medium sized line painting and field marking jobs. The NOKIN PowrLiner 850 paint striper is easy for a one person operation and for all day parking lot painting.

NOKIN changed the thermoplastic striping world with its innovative ThermoLazer ® Striping System. But sometimes good isn’t good enough. We listened and learned what thermoplastic striping contractors really wanted: a fast, safe way to melt thermoplastic materials without the high cost of support systems such as premelt kettle trucks or trailers.

Introduction of Thermoplastic Road Marking Paint Plant. 1). Road marking paint mixing equipment /hot melt coating production machine is fast speed mixing, stir with the multi-layer spiral belt, the overall movement of materials, high speed and high yield, the average mixing time is 5-10 minutes ; 2).