The machine marking employs the spray method of marking, where the air is compressed to paint on the surface. One gets a thin and smooth layer of the atomized paint because of the rebounding airflow. A high-pressure airless pump is used in this case to create neat line-markings.

specially formulated for spray application. It is applied between 0.3-1 mm thickness by means of an airless spray system. It is cured in a 100:2 ratio through a static mixer with BP liquid or separately with a mixture of hardening powder glass beads or special BPO

30/08/2012 · AIRLESS SPRAY EQUIPMENT 6.21. , fast, safe and reliable • There is no other machine so cost effective. AIRLESS SPRAY EQUIPMENT. AUTO LAYOUT ... 1998 Road Marking Materials Part 1:

2.1 Road Note No. 7 was published in 1984 to promulgate the use of thermoplastic road marking material to replace s road marking paint. The major advantages of hot applied thermoplastic road marking are its improvement of reflectorisation at night with the addition of glass beads and it is more durable thanthat road marking paints.

An airless spray marking machine pressurizes the paint to 3000PSK 210Kg/cm by a high-pressure plunger pump, the high-pressure paint is delivered to the spray gun through the high-pressure hose, and the pressure is released through the nozzle to form a spray, thereby forming a dense coating on the wall surface. Click here you can check our road painting machine for sale.

Sprayair & Power is an authorized supplier for NOKIN airless spraying machines in South Africa. All information, illustrations, and specifications in this document are based on the latest product information available at the time of publication and are believed to be correct at this time. E&OE.

paint sprayed on the road surface. The glass beads will be introduced or applied to the wet paint film by means of automatic spray guns and under air pressure. 2.1 Uniformity The paint shall be homogenous and shall be well dispersed to a uniform and smooth consistency. The paint shall be capable of easy application with an automatic spray gun.

The Unimark Highwayman cold paint road marking machine is suitable for highway and airport runway / taxi-way markings. With twin hydraulic paint pumps it can deliver fast single colour marking and can spray 2-colours at the same time. The machine has 4-airless spray guns to give line widths of 10 to 100 cm wide or apply various 2 or 3 line systems.

Professional road marking machines “The best solution for your road marking applications” TABLE FOR NOZZLE SELECTION Nozzle height from the ground Spray angle 20° Line width Spray angle 40° Spray angle 60° 10 cm ~ 3 cm ~5 cm ~ 10 cm 15 cm-~ 7 cm ~ 13 cm 20 cm ~ 6 cm ~ 8 cm ~ 16 cm 25 cm-~ 10 cm ~ 20 cm 30 cm ~ 10 cm ~ 12 cm ~ 23 cm 35 cm - - ~ 26 cm

spread rate of 3m² or 30 lineal metres for a 100mm line, to a wet film thickness of 300-350 microns. Typical spraying recommendations for Airless Spray; Pressure 1800 – 2000 PSI Distance from surface 15 cm to 20 cm Fluid Tip Use machine manufacturers recommendation for width of line Filter 50 mesh

Sprayair & Power is a leading supplier of drive on and push behind airless road marking and pavement marking equipment. Our road marking equipment can also be applied to mark parking spaces and other designated areas determined by usage requirements. We also supply cold paint road marking systems that can be mounted onto LDV vehicles for larger road marking projects that require long runs and the ability to hold marking

Gajanan GC-100 Thermoplastic Road Marking Machine. ₹ 85,000. Gajanan Construction. Fully Automatic Thermoplastic Road Marking Machine, Model Name/Number: SIGMATRMM13, Capacity: 500 Kg. ₹ 11 Lakh. Vishwakarma Engineering. NOKIN Thermolazer Machine, Model/Type: Line Lazer Iv 3900, Capacity: Standard. ₹ 2.95 Lakh Get Latest Price.

TRAKMARK - WR is suitable for application by airless spray, roller or brush. Stir well before use. Using airless spray equipment, use spray tips and between 2000 and 2500 psi (138 to 172 bar) pressure. One coat at the recommended wet film thickness should be sufficient under normal conditions, depending on the texture of the surface.

Road surface marking is any kind of device or material that is used on a road surface in order to convey official information; they are commonly places with road marking machines (or road marking equipment, pavement marking equipment).They can also be applied in other facilities used by vehicles to mark parking spaces or designate areas for other uses.

This equipment is operated airless the way, is transported manually or self-propelled way. Marking machine Hyvst. This company is a well-known technique of a series of SPLM-2000. The equipment works according to the airless method marking on the road surface. The unit is assembled on the basis of piston pump and petrol engine.