Using airless spray equipment, use spray tips and between 2000 and 2500 psi (138 to 172 bar) pressure. One coat at the recommended wet film thickness should be sufficient under normal conditions, depending on the texture of the surface.

formulated for spray application. It is applied between 0.3-1 mm thickness by means of an airless spray system. It is cured in a 100:2 ratio through a static mixer with BP liquid or separately with a mixture of hardening powder glass beads or special BPO-Coated

Buy Road Line cold spraying Paint Manual Marking Machine from Machine Business Opportunities, Road Line cold spraying Paint Manual Marking Machine specifications: Manual marking machine, 1.Working pressure:10-15Mpa, 2.Efficiency:200squar meter/h, 3

Buy Hand Push Airless Spray Painting Machine For Roads from Machine Business Opportunities, Hand Push Airless Spray Painting Machine For Roads specifications: Painting machine for roads, 1.Working pressure:10-15Mpa, 2.Efficiency:200squar meter/h, 3

Spread Rate:Approximately 3m²/1lt (equal to 30m x 100mm)depending on the porosity of the substrate and the thickness of the film applied.. Drying Time:This is very much dependant on wet film thickness, road surface temperature, air flow (wind) and relative humidity.

Manufacturer of Road Marking Machines - Kataline Traffix T100M, Kataline CP100S Concrete Sprayer Marking Machine, Trackmark100 Cold Spray Marking Machine and Traffix P500h Thermoplastic Pre-Heater offered by Kataline Infraproducts Private Limited, Nagpur, Maharashtra.

Buy Hand Push Cold Spraying Paint Road Line Marking Machine from Machine Business Opportunities, Hand Push Cold Spraying Paint Road Line Marking Machine specifications: Road line marking machine, 1.Working pressure:10-15Mpa, 2.Efficiency:200squar

NOKIN Triton 308 double diaphragm low pressure pumps are an air-operated diaphragm spray package that applies a high quality, decorative finish to wood and metal parts. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

Driving Automatic Road Marking Machine Manufacturers, Factory, Suppliers From China, Quality is factory' life , Focus on customer' demand is the source of company survival and development, We adhere to honesty and good faith working attitude, looking forward

Highway Safety Road Marking Airless Cold Paint Spray Machine, US $ 4000 - 8000 / Set, Construction works , New, 5.5HP.Source from NOKIN traffic Traffic Facility Co., Ltd

airless spray, high viscosity materials can be atomized without costly solvent reduction. 4. Airless accommodates faster production line speeds. More paint can be applied at a heavier mil thickness. 5. Good penetration can be attained on recessed areas of

Road Marking Machine Applications Road line machine is a road construction machinery to mark lines such as different constraints, guidelines, and warnings rules on flat ground,widely used in roads, railways, highways, bridges, parking lots,tunnels, coal mines

Using self-propelled semi automatic Airless spraying machine, paint the pavement marking in 2 layers to achieve a minimum thickness of 400 microns (WFT) 13. The wet paint film thickness shall be maintained as 400 Microns and the rate of spray of paint in Sq.M Ltr shall be determined after the field trials.

Machine marking types Air spray is a method of marking that uses compressed air to spray the paint onto the road surface. The finely atomized paint produces a thin and smooth layer, but the rebounding air flow causes significant paint scattering.

The surface, with proper applied and embedded surface beads, must provide a minimum resistance value of 50 BPN when tested according to ASTM E 303. H. Thickness: The material must be supplied at a minimum thickness of 125 mils (3.15mm). No glass