3. The paint shall be applied uniformly and the wet film thickness shall be neither less than 0.35 mm nor more than 0.40 mm. Paint Thickness 4. Glass beads shall be applied by air propulsion to the surface of all longitudinal lines at a net application rate of 0.30

Contact Persion: James Zhang. Tel: +86-511-87059003. Mob: +86 15862991398. Wechat/Whatsapp: +86 15862991398. Email: sales@trafficmarkingmachine.com. Road Mark. We have the most advanced production equipment, experienced and qualified engineers and workers, recognized quality control systems and a friendly professional sales team pre/after-sales

Road Marking Paint Technical Data Sheet 1 Film thickness per coat Typical recommended range Dry film thickness 40-80µm Wet film thickness 110-210µm Film thickness will vary and is calculated as average. Theoretical spreading rate 9.25-4.5m²/l

LXD-II road surface blowing machine is the auxiliary equipment for road line marking construction, which mainly used to sweep the road surface before road marking construction. Cheap PriceList for Hot Road Marking Paint Machine - LXD860 Self-Propelled Thermoplastic Road Marking Machine – Luxinda

(ii) Roadmarking - 0.3 mm minimum dry film thickness The minimum dry paint film thickness specified above shall be the end product thickness measured on a 200 mm x 100 mm sheet metal test plate without beads. (b) Glass Beads (i) Linemarking

11.04 PAINT SUPPLY All pavement marking paint shall be waterborne and shall conform with the requirements of AS 4049.3 Completed markings shall be uniform in appearance, texture, width and thickness and the surface shall be free from unbeaded areas

Thickness – Materials applied thinner than specified will shorten life expectancy and can cause premature bond and retroreflectivity failures. Specifying a 90 mil minimum

The cold spray marking machine is special equipment for road marking, used for straight lines, dashed lines, curves, guide arrows, texts, etc. of highways, urban roads, and markings. It has the advantages of simple structure, flexible operation, convenient use, free closing, neat marking, uniform coating, etc. Send your requirement to us if you need to buy road marking machine for sale .

application rate is as follows when demonstrating all paint line tests with minimal waste at an application rate of: (a) 27.5 kg per km of continuous 100 mm wide paint marking (b) 41.25 kg per km of continuous 150 mm wide paint marking (c) 55 kg per km of

(190–160 linear feet for 4-inch line width per gallon) Well-worn and well adhered existing markings, see Information Folder 5.28 20 to 22 mils (240–220 linear feet for 4-inch line width per gallon) For use as temporary markings (prior to durable marking application)

Ordinary Road Marking Paint 803.3.1. Ordinary paint used for road marking shall conform to Grade 1 as per IS: 164. 803.3.2. The road marking shall preferably be laid with appropriate road marking machinery. 803.3.3. Laying thickness of road marking

Contact Supplier Request a quote. Stainless Steel Cold Road Marking Machine ₹ 1.85 Lakh. Get Quote. X8 Road Marking Machine ₹ 2.16 Lakh. Get Quote. Mild Steel Line Marking Machine, Capacity: Double Gun. ₹ 1.95 Lakh Get Latest Price. Usage/Application: Cold road marking. Road Marking Type: Double Gun Cold road marking.

The line thickness is simply determined by visually noting the depth of penetration. The most accurate determination of thickness can be accomplished by laying a metal panel or black duct tape in the dispensing device path.After the application is made on the panel, it is removed and the total material thickness

Apply the thin layer of pavement marking paint and beads at the rate necessary to produce a dry film thickness of 5 to 8 mils. Apply drop-on glass beads at a rate of 1 to 3 lb/gal of paint. Provide drainage openings at intervals of 250 ft in edge lines placed on the inside of curves and in edge lines on the low side of tangents.

12/5/2021 · Subsection 811.03.B of the 2012 Standard Specifications for Construction has been verified which states the following: Apply sharp, well-defined markings, free of uneven edges, overspray, or other visible defects, as determined by the Engineer. Ensure pavement marking lines are straight, or of uniform