REPORT IPRF 01-G-002-05-1 AIRFIELD MARKING HANDBOOK Photograph courtesy of NASA Program Management Office 5420 Old Orchard Road Skokie, IL 60077 September 2008 An IPRF Research Report Innovative Pavement Research Foundation Airport Concrete Pavement Technology Program REPORT IPRF 01-G-002-05-1 AIRFIELD MARKING HANDBOOK Principal Investigator

Ordinary Road Marking Paint 803.3.1. Ordinary paint used for road marking shall conform to Grade 1 as per IS: 164. 803.3.2. The road marking shall preferably be laid with appropriate road marking machinery. 803.3.3. Laying thickness of road marking paint shall be as specified by the Engineer. 803.4. Hot Applied Thermoplastic Road Marking

This specification covers a hot -melt, retroreflective, thermoplastic traffic marking material that is suitable for producing durable traffic stripes and pavement markings on portland cement concrete or asphalt concrete pavements. This material is heated a nd applied to road surfaces in a molten state using a mechanical applicator.

Drive Type Road Line Spray Thermoplastic Machine Hot Melt Road Marking Equipment Price , Find Complete Details about Drive Type Road Line Spray Thermoplastic Machine Hot Melt Road Marking Equipment Price,Drive Type Road Spray Thermoplast Machine,Driving Hot Melt Road Marking Equipment,Road Line Marking Machine from Road Marking Machines Supplier or Manufacturer-,Shenzhen NOKIN Traffic

The equipment generally consists of a hot melt kettle, a thermoplastic road marking machine, a road marking machine, a waterline machine, an air sweeper machine, and a primer machine. However, not all the devices needed to be purchased, users can choose different types, grades, and functions of equipment configuration according to their own

Road Marking Paint Technical Data Sheet 1 Film thickness per coat Typical recommended range Dry film thickness 40-80µm Wet film thickness 110-210µm Film thickness will vary and is calculated as average. Theoretical spreading rate 9.25-4.5m²/l Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections

torch, then positioning and applying heat to the marking itself. Providing that all necessary conditions are met concerning temperature of material and substrate, absence of moisture, road preparation and minimum thickness, you can achieve excellent markings life-cycle performance using any of these thermoplastic products. 3.

Apply traffic stripe paint by machine. If areas or markings are not adaptable to machine application, use hand equipment. 1. Application Rate All work will be subject to application rate checks for both paint and beads. Apply 5 in (125 mm) wide traffic stripe at the following minimum rates: a.

types ofmaterials may cause the paint to gel or coagulate. The wet film thickness oftraffic paint should be either 0.38 mm for existing pavement surfaces and new concrete surfaces, or 0.51 mm for new asphalt pavement surfaces. For open graded or paver placed surface treatments, a wet film thickness of 0.75 mm may be required.

thickness for Series 5000 is determined by the application surface or marking use, and discussed in Section 5 below. See 3M Information Folder 5.28 for detailed surface preparation recommendations. For long line markings, Series 5000 is applied using a specialized mobile, truck-mounted or self-contained, pavement marking machine.

marking machine. The equipment will be capable of traveling at a uniform, predetermined speed over variable road grades to produce uniform application of striping material, following straight lines and making normal curves in a true arc. The equipment will be capable of air-blasting the pavement, applying the thermoplastic stripe and

is uniformly hot-sprayed onto the pavement surface at the required thickness. 3. Reflective glass beads are injected into, or dropped onto, the liquid polyurea marking at manufacturer’s recommended rate.. The Wet-Night Reflective Elements are applied at the manufacturer’s recommended rate.

The 3M All Weather Thermoplastic pavement marking syst em requires a minimum binder thickness of 90 mils (2.25 mm). This minimum thickness is typically used when refurbishing existing pavement markings. However, the target binder thickness for a particular project will depend on agency requirements and the roughness of

The marking lines of airport runway is marked by road marking machine. And the best striping machine for airport is DY-STM Thermoplastic Road Marker Machine, a medium screeding type road lines marker, compact and small, flexible to operate. construction Attentions : 1.

AS1580.107.3 - Determination of wet film thickness by gauge AS 2009 - Glass beads for road-marking materials. AS 4049.1 - Solvent-borne paint - For use with drop-on beads. AS 4049.2 - Thermoplastic road marking materials. AS 4049.3 - Waterborne paint - For use with drop-on beads. C261.03 TYPE OF MARKINGS 1.