beads. Drop-on glass beads shall be uniformly applied at a minimum rate of 4-kg of beads per 10 square meters of thermoplastic. The retroreflectivity shall be measured as specified in ASTM E 1710. 3.4.7.11 Color after Application The daytime color of the

The BM 5000 series provides you with a variety of high capacity line marking machines designed for large scale jobs such as marking highways, motorways or airport runways. The BM 5000 T CA is a combination machine that can be used for applying both thermoplastic and cold paint markings in various widths.

2020/12/12 · The minimum thickness for marking the paint shall be at least 2.5mm and minimum width will be 100mm. Now the thermoplastic material shall be poured in to the road marking machine or screed application machine it shall be placed over the string and ...

Thermoplastic Road Marking equipment Thermo Hog TH 16.0 The Thermo Hog is a thermoplastic longline truck that can apply yellow or white thermoplastic lines either individually or simultaneously. Our Hog Melter can melt thermoplastic at a rate of up to 8,000

Our thermoplastic road line marking tape is the easy way to mark out roads and car parks. No mess, no fuss and the premium quality of the material cannot be beaten for long lifespans and ease of application. Supplied as a single roll in a 5-meter length with a choice of widths, 50mm, 100mm, 150mm and 200mm. White or yellow lines are available

7.1.8 Road markings have the limitation that they may be obscured by snow, leaves or debris on the carriageway. Their conspicuity is impaired when wet or dirty and their durability depends largely on their exposure to traffic wear. Nevertheless, they serve a very

Rapidly turn over material. Pavement and air temperatures should be above 50F. Apply primer (where recommended) and thermoplastic at correct thickness. Residual primer solvent must evaporate prior to thermoplastic application. Do not overheat material. Verify material temperatures & calibrate kettle thermometers.

S.NO DESCRIPTION RATES 1. Road Marking. Providing and applying 2.5mm thick road marking strips (retro-reflective) THERMOPLASTIC ROAD MARKING MACHINE OS – 813 Rs. 170000/- Each 9. THERMOPLASTIC ROAD MARKING BOILER OS – 814 ...

thermoplastic road marking equipment for sale is the key equipment used in hot met road line marking construction,it need to be worked with hot melt paint preheater. The marking hopper of this machine is made of high-precision cast iron,which can make the marking line orderliness,uniform thickness and more beautiful.

Specification of thermoplastic road marking machine T hermoplastic road marking machine is the key equipment used in thermoplastic road marking construction,it need to work together with thermoplastic preheater. The marking shoe is made of high-precision cast iron,which can make the road line orderliness,uniform thickness and more beautiful.

The BM 2000 T is an agile machine with excellent load abilities and a turning radius of only 3,2 m. It allows for material tank capacity of 265 L. The BM 2000 has a one-seat slidable drive and operator section for flexible working on the left or right side. The thermoplastic Borum extruder can apply lines of 5 – 40 cm width depending on the

Rubber Modified Bitumen, Thermoplastic, Water Based Paints, Bituminous Mastic Asphalt. Application Method. Brush , Roller, Spray. Packaging Size. 15 L. Drying Time. 10 minutes at 32 degree C. We are instrumental in offering our clients a high-quality range of Heat Reflective Coating that is used on Runway Paint Marking.

Introduction. A majority of the pavement markings placed on TxDOT roadways over the past five years fall into one of three categories: thermoplastic, water-based paint, and preformed tape. However, other materials exist that have shown positive performance either in Texas or elsewhere, which warrants their discussion in this handbook.

Factory direct sales LS-100 Construction thermoplastic road marking machine Application: I t Used in railway, highway, bridge, tunnel, mine, construction and other fields. Fatures and benefits : 1. Paint barrels: double stainless steel heating insulation barrels

period prior to opening the road to traffic. 711-4.1.1 Preformed Thermoplastic: Apply markings to dry surfaces only and when ambient air temperature is at least 32 F. Prior to installation, follow the manufacturer’s recommendations for pre-heating. 711-4.2 711-4.2